2015年5月26日星期二
What is the hose coupling
The hose coupling is a connector on the end of a hose to connect (or couple) it with another hose or with a tap or a hose appliance, such as an irrigation sprinkler. It is usually made of steel, brass, stainless steel, aluminium or plastic.
2015年5月18日星期一
The valve sealing requirements
Valve sealing performance refers to the sealing parts of valve's ability to prevent leakage of medium, it is the most important technical performance index of the valve.There are three sealing parts of the valve : open-close part and seat the contact point between the two sealing surface;Packing cooperate with stem and packing gland;The joint of the body and bonnet.One former place called internal leakage of leakage, known as the closed lax, it will affect the valve truncation medium capacity.For block valves class, the internal leakage is not allowed.After the two called the outside leakage, the medium from leaking to the outside of the valve from the valve.Leakage would cause material loss, environmental pollution, serious when still can cause accidents.For flammable and explosive, toxic or radioactive medium, leakage is not allowed, so the valve must have a reliable sealing performance.
2015年5月7日星期四
Camlock couplings use notes
Camlock couplings use has many notes,today Shanghai K&G machinery Co.,Ltd will tell you as follows:
1. Please don't used to apply fluid outside of the fluid.
2. When using don't exceed the maximum working pressure limit.
3. Do not use outside the operating temperature range, causing the sealing material to prevent wear or leaks.
4.Don't punch, bending, stretching, prevent breakage.
5. Do not mix the metal powder or sand and dust and other places, to prevent adverse or leak job.
6. Screw type of installation, the installation do not exceed the maximum tightening torque to prevent damage it.
7. Do not use a hose with a crack, to prevent leakage or loss caused.
8. Such as for there is vibration, shock machines will cause a decrease in durability.
9. Using the fluid must be filtered through the filter clean fluid.
10. Do not disassemble
1. Please don't used to apply fluid outside of the fluid.
2. When using don't exceed the maximum working pressure limit.
3. Do not use outside the operating temperature range, causing the sealing material to prevent wear or leaks.
4.Don't punch, bending, stretching, prevent breakage.
5. Do not mix the metal powder or sand and dust and other places, to prevent adverse or leak job.
6. Screw type of installation, the installation do not exceed the maximum tightening torque to prevent damage it.
7. Do not use a hose with a crack, to prevent leakage or loss caused.
8. Such as for there is vibration, shock machines will cause a decrease in durability.
9. Using the fluid must be filtered through the filter clean fluid.
10. Do not disassemble
订阅：
博文 (Atom)